No items added
12-202 2.4GHz SmartAmp Bi-Directional Amplifier
This SmartAmp™ Bi-Directional is ideal for increasing the range of low power radio devices and to compensate for cable loss in certain installations.
Designed for extending the range of 2.4 GHz wireless radio devices, the SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain. The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum. Ideal for increasing the range of low power radio devices and to compensate for cable loss in certain installations.
Technical Specifications
Features:
250 mwatt Indoor/Outdoor
Operating Range:
2400 - 2500 MHz
Operating Mode:
Bi-directional, TDD
Transmit Gain*:
up to 20 dB
Frequency Response:
± 1 dB
Output Power:
250 mW (+24 dBm)
TX Input Power:
0 dBm min 23 dBm max
Receiver Gain:
10-13dB, 12 dB typical
Noise Figure:
3.5 dB typical
LED Inidicators:
RED
GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power
Blinking: Transmitting
Connectors:
N-type, female, 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
Available
Power Consumption:
Tx = 540 mA, Rx = 60 mA @ 7.5V DC
Operating Temperature:
-40 °C to + 70 °C
