Laird Technologies POE-55iG-ATI Gigabit PoE Power Supply/Injector

The POE-55iG-ATI is an advanced 802.3at compliant, non-proprietary power supply/injector. The power supply is autoranging on the input and has a regulated voltage output with overload and short-circuit protection. It functions with any equipment compliant with the IEEE 802.3at POE standards. The POE-55iG-ATI includes the intelligent detection algorithms detailed in the 802.3at spec, meaning it will power up any device connected to it. The power is supplied on Ethernet pins 4/5 (V+) and 7/8 (V-) and comes complete with a standard North American 115 VAC power cord. International cords are available upon request.

Using power over Ethernet to power remote devices has several advantages including:

• The power supply can be centrally located where it can be attached to an uninterruptible power supply.
• The user has the ability to easily power on and reset the attached equipment from a remote location.
• There is no need to run additional power cabling to the device as power can be supplied over the CAT5 Ethernet cable.
• The power supply can power a remote device up to 300 feet away, limited only by the Ethernet standard.

FEATURES

• "Carrier class" power over Ethernet system
• Autoranging power supply/ injector
• Built-in Ethernet surge protection to prevent equipment damage
• Overload and short-circuit protection
• Minimum cross-talk and insertion loss
• Advanced switching technology – runs cool
• Powers clients that accept power on unused Ethernet pins 4,5,7,8
• FCC and CE approved
• Current indicator (CI) option available

MARKETS

• Remote routers, access points, and bridges
• Remote networking equipment
• Remote camera systems
• 400 MHz to 10 GHz systems
• SOHO equipment
• IP phone systems