No items added
12-101 SmartAmp 900MHz 1 Watt
Designed for extending the range of 900MHz wireless radio devices.
Designed for extending the range of 900 MHz wireless radio devices, the SmartAmp™ is particularly effective when used with Direct Sequence or Frequency Hopping Spread Spectrum radio modems. The unit provides the transmit power amplification as well as receive signal gain. Full output power of 1W is achieved with only 4mW input to the amplifier. Above 4mW input, the SmartAmp attenuates the input signal power and maintains the output power typically at 1W. Substantial discounts available for OEMs and large volume purchases. Also available in 2.4 & 5.8GHz versions. The built-in dynamic power sensor in SmartAmp™ adjusts the Radio Frequency (RF) power output level by reading the input signal power. This Automatic Gain Control (AGC) Technology, Teletronics' patented technology effectively making the RF amplifiers "Plug & Play" delivers the maximum output power at various input levels while keeping the distortion at a minimum.
Technical Specifications
Features:
1Watt
Operating Range:
902-928 MHz
Operating Mode:
Bi-directional, TDD
Transmit Gain*:
up to 24dB
Frequency Response:
± 1 dB
Output Power:
1 Watt (+30dBm)
TX Input Power:
0 dBm min 23 dBm max
Receiver Gain:
16 dB typical
Noise Figure:
3.5 dB typical
LED Inidicators:
RED
GREEN/ORANGE
Solid On: Power and Receiving mode Off: No Power
Blinking: Transmitting
Connectors:
N-type, female, 50 Ohm
Lightning Protection:
Quarter Wave Technology
DC Surge Protection:
Available
Power Consumption:
Tx = 1.2A, Rx = 130 mA @ 9VDC
Operating Temperature:
-40 °C to + 70 °C
Dimensions:
4.25" L x 3.25" W x 1.75" H
*Transmit Gain is automatically adjusted
