Solar and Wind Power (Remote)

• • Complete Kit – Solar Panel, Pole/Wall Mount, Outdoor 12AWG Cable, Battery Charge Controller
• • Accommodates 2″ to 6″ dia. Pole or Wall Mount
• • Quick tilt adjustment (15° to 65°)
• • Certified for up to 110MPH Winds

• • Complete Kit – Solar Panel, Pole/Wall Mount, Outdoor 12AWG Cable, Battery Charge Controller
• • Accommodates 2″ to 6″ dia. Pole or Wall Mount
• • Quick tilt adjustment (15° to 65°)
• • Certified for up to 110MPH Winds

• • All components required to add an additional 2x 60-72 cell panels (nominally 230-360 watt) to the TPSM-350×2-TP 2 panel mount
• • Stainless Steel, Galvanized Steel, and Anodized Aluminum construction

• • Configurable as 24V or 48VDC System
• • Weatherproof, UV resistant, outdoor enclosure
• • Powered from AC mains power and/or Solar
• • Interior space for customer electronics
• • Ground Mounting

• • Steel
• • 35 x 7.5 x 525mm

• • Complete 2.2KW Remote Power Solutions for Off-Grid Operation.
• • Supports up to 360W continuous power with 6hrs peak sun.
• • Weatherproof Outdoor Enclosures with up to 1440Ah Battery
• • Expandable Ground Mounted Solar Mount
• • High Performance Sealed Lead Acid AGM Batteries

• • Outdoor Rated
• • 1.8m

• • 6.1m

• • 1.1m

• • Complete 170W Remote Power Solution for Off-Grid Operation
• • Weatherproof Outdoor Enclosures with up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • High Performance Sealed Lead Acid AGM Batteries
• • MPPT and PWM Solar Charge Controllers, some with PoE output

• • Provides Windows PC Connectivity for Tycon RS485 MPPT Solar Controllers
• • Compatible with the following models: TP-SC24-30N-MPPT TP-SC24-60N-MPPT TP-SC48-60P-MPPT
• • Works with MyGreen Solar Monitor PC Software
• • Powers from PC USB Port

• • Simple, Low Cost Design
• • Accommodates 10-14″ Wide Solar Panels
• • Flexible Side of Pole Mounting ( to 4.5” dia. Pole)
• • Heavy Duty Aluminum and Stainless Steel components for long life
• • Easy to Install – Reduced Installation Time

• • All components required to add an additional 4x 60-72 cell panels (nominally 230-360 watt) to the TPSM-350×2-TP 2 panel mount
• • Stainless Steel, Galvanized Steel, and Anodized Aluminum construction

• • Utilizes Components from TPSM-250X4-TP or TPSM350X2-TP to Create a Side of Pole Mount for two 250- 360W Solar Panels

This part is EOL

KEY FEATURES:

• 12V 30W Solar Panel
• Ready to mount quick connection kit
• Pole/Wall Mount, Cable
• Battery Charge Controller

• • Plated Steel
• • 35 x 7.5 x 325mm

• • All Stainless Steel for higher reliability
• • Wide Adjustment Range 6″ to 2″
• • Worm Gear with 5/16″ Slotted Drive
• • Heavy Duty: 0.024″ Thick Band, 9/16″ Width
• • Meets SAEJ1508 Specification

• • 150mm

KEY FEATURES:

• • 600mm