Tycon Power Systems

• • +/- 36 to 72VDC Input
• • High 56VDC @ 4.46A Output, Short Circuit Protected
• • Metal Enclosure, DIN rail mounting
• • Industrial Temperature Operation
• • Most Models Isolated Input to Output

• • Integrated Controller with Dump Load to Optimize Performance
• • Wind Turbine startup wind speed of 2.1m/s (4.5mph)
• • Smooth and quiet running maintenance free sealed turbine
• • Sealed die cast aluminum housing for protection from harsh environments
• • Very light and compact

• • Weatherproof, UV resistant, outdoor enclosures
• • Powered over CAT5 cable using Passive POE and/or Solar
• • Generous interior space for customer electronics
• • Wall or Pole Mounting
• • Isolates Customer Equipment from Power Line Surges

• • Weatherproof, UV resistant, outdoor enclosures
• • Powered over CAT5 cable using Passive POE and/or Solar
• • Generous interior space for customer electronics
• • Wall or Pole Mounting
• • Isolates Customer Equipment from Power Line Surges

• • Weatherproof, UV resistant, outdoor enclosures
• • Powered over CAT5 cable using Passive POE and/or Solar
• • Generous interior space for customer electronics
• • Wall or Pole Mounting
• • Isolates Customer Equipment from Power Line Surges

• • Plated Steel
• • 35 x 7.5 x 325mm

• • All Stainless Steel for higher reliability
• • Wide Adjustment Range 6″ to 2″
• • Worm Gear with 5/16″ Slotted Drive
• • Heavy Duty: 0.024″ Thick Band, 9/16″ Width
• • Meets SAEJ1508 Specification

• • 150mm

• • 150mm

• • 600mm

• • 150mm

KEY FEATURES:

• • Shielded CAT5e cable and connectors for added protection against surges and interference
• • Cat5 rated RJ45 jack for more reliable high speed data connections (10/100MB)
• • Shrouded DC jack for improved safety

KEY FEATURES:

KEY FEATURES:

• 48V PoE and 24VDC outputs, RJ45 & 5.5mm x 2.5/2.1mm DC Connector
• Dual Output: 48V PoE and 24VDC Output
• Output Power Up To 15W

KEY FEATURES:

• 48V Passive PoE and 48VDC outputs
• Dual Output: 48V PoE plus 48VDC Output
• Converts an Active PoE Input to a DC output
• Output Power Up To 15W

KEY FEATURES:

• • Converts PoE input to 5VDC
• • Outputs up to 25W
• • Provides 5VDC 25W from standard 802.3at PoE input
• • Short Circuit, Over Current and Over Voltage Protection
• • High Temperature Operation

• • Converts PoE input to DC or AC output
• • Outputs up to 80W
• • POE-SPLT-4812G Provides 12VDC, 25W from standard 802.3at PoE input
• • Short Circuit, Over Current and Over Voltage Protection
• • High Temperature Operation

• • Converts PoE input to PoE and VDC output
• • Gigabit Ethernet compatible
• • Combined Outputs up to 50W
• • 2 pair and 4 pair input compatible
• • PoE 48V DC output on wire terminal connection.

• • Shielded CAT5e cable and connectors for added protection against surges and interference
• • Cat5 rated RJ45 jack for more reliable high speed data connections (10/100MB)
• • Shrouded DC jack for improved safety

KEY FEATURES:

• • Shielded CAT5e cable and connectors for added protection against surges and interference
• • Cat5 rated RJ45 jack for more reliable high speed data connections (10/100MB)
• • Shrouded DC jack for improved safety

KEY FEATURES:

KEY FEATURES:

KEY FEATURES:

• • High Power and rugged design
• • Short Circuit, Over-Voltage, Over-current Protection
• • 90-264VAC Auto Ranging Input
• • 47~56VDC Adjustable Output
• • -40C to +70C Operating Temperature

• • 18V 150W High Power Autoranging
• • 120/240 VAC 50/60 Hz 18VDC at 7.5A

• • Pantone Color: Warm Gray 1C

• • Complete 340W Remote Power Solution for Off-Grid Operation
• • 4000+ Cycle Life @ 80% discharge LiFePO4 Lithium Batteries
• • Weatherproof Outdoor Enclosures accommodate up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • MPPT Solar Charge Controllers with RS485 Interface

• • Complete 170W Remote Power Solution for Off-Grid Operation
• • 4000+ Cycle Life @ 80% discharge LiFePO4 Lithium Batteries
• • Weatherproof Outdoor Enclosures accommodate up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • MPPT Solar Charge Controllers with RS485 Interface

• • Complete 340W Remote Power Solution for Off-Grid Operation
• • 4000+ Cycle Life @ 80% discharge LiFePO4 Lithium Batteries
• • Weatherproof Outdoor Enclosures accommodate up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • MPPT Solar Charge Controllers with RS485 Interface

• • Complete 340W Remote Power Solution for Off-Grid Operation
• • 4000+ Cycle Life @ 80% discharge LiFePO4 Lithium Batteries
• • Weatherproof Outdoor Enclosures accommodate up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • MPPT Solar Charge Controllers with RS485 Interface

• • Complete 340W Remote Power Solution for Off-Grid Operation
• • 4000+ Cycle Life @ 80% discharge LiFePO4 Lithium Batteries
• • Weatherproof Outdoor Enclosures accommodate up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • MPPT Solar Charge Controllers with RS485 Interface

• • Operation up to 3 miles with good line of sight and up to 900 Mbps throughput
• • No driver needed. Automatic peer to peer communications
• Provides 5GHz Backhaul and 2.4GHz Access Points
• • Strong Wireless data security
• • Remotely change device configuration or update firmware from anywhere on the network

• • Up to +5WP Positive Power Output Tolerance
• • Excellent Low Light Performance
• • Extremely Reliable. 5 Year Product Warranty. 25 year solar cell output warranty.
• • High Efficiency with high transparency low iron tempered glass cover. Rugged extruded anodized aluminum frame
• • Sealed for protection from harsh environments

• • Longer Cycle Life: Up to 20x over Lead Acid
• • Less weight: ~40% less than Lead Acid
• • Higher Power: 2x more Watt Hours than Lead Acid
• • Stable and Safe Lithium Iron Phosphate (LiFePO4)
• • On Board Battery Management (BMS)

• • 12VDC System
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • Interior space for customer electronics
• Wall or Pole Mounting

• • Complete Remote Power Solution for Off-Grid operation
• • Weatherproof, UV resistant, outdoor enclosures
• • Enclosures can be Wall or Pole Mounted
• • High Performance Valve Regulated Sealed Lead Acid Batteries
• • Advanced battery charge controller protects against overcharge and over discharge

• • Complete Remote Power Solution for Off-Grid operation
• • Weatherproof, UV resistant, outdoor enclosures
• • Enclosures can be Wall or Pole Mounted
• • High Performance Valve Regulated Sealed Lead Acid Batteries
• • Advanced battery charge controller protects against overcharge and over discharge

• • Complete Remote Power Solution for Off-Grid operation
• • Weatherproof, UV resistant, outdoor enclosures
• • Enclosures can be Wall or Pole Mounted
• • High Performance Valve Regulated Sealed Lead Acid Batteries
• • Advanced battery charge controller protects against overcharge and over discharge

• • Complete Remote Power Solution for Off-Grid operation
• • Weatherproof, UV resistant, outdoor enclosures
• • Enclosures can be Wall or Pole Mounted
• • High Performance Valve Regulated Sealed Lead Acid Batteries
• • Advanced battery charge controller protects against overcharge and over discharge

• • Input Voltage 9-36VDC
• • IEEE 802.3af Compliant 17W Mode A PoE Output
• • Dual Inputs for Connecting 2 Power Sources
• • Integrated 10/100/1000MB PoE Inserter
• • Low Self Consumption Power

• • Remotely Power Equipment thru CAT5/6 Cable up to 100m
• • Built in Ethernet and AC Surge Protection
• • Autoranging Switching Power Supply
• • Short Circuit, Over Current and Over Voltage Protection
• • Medium Power Model up to 24W

• • Converts 24VDC Passive PoE to 56VDC 802.3af/at 35W PoE Output. Gigabit Compatible
• • Run 802.3af/at equipment from 24VDC Passive PoE switches like Tycon TP-SW5G-NC / TP-SW8-NC or Ubiquiti TOUGHSwitch
• • PoE output up to 35W
• • Remotely Power Equipment thru CAT5/6 Cable up to 100m
• • Short Circuit, Over Current and Over Voltage Protection

KEY FEATURES:

• 12-24V DC Battery
• Analog Meters for Quick View of System Status
• Ultra Low Self Power Consumption

• • Solar Ready™
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • LFP (LiFePO4) Lithium Batteries
• • Isolates Customer Equipment from Power Line Surges

• • Solar Ready™
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • LFP (LiFePO4) Lithium Batteries
• • Isolates Customer Equipment from Power Line Surges

• • Solar Ready™
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • LFP (LiFePO4) Lithium Batteries
• • Isolates Customer Equipment from Power Line Surges

• • Solar Ready™
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • LFP (LiFePO4) Lithium Batteries
• • Isolates Customer Equipment from Power Line Surges

• • Solar Ready™
• • 48V MPPT Charge Controller with 7 Port GigE PoE Switch. Ports can be configured for 802.3at or 24V Passive PoE. Remote Monitoring and Control.
• • Weatherproof, UV resistant, outdoor enclosures
• • Powered from AC mains power and/or Solar
• • LFP (LiFePO4) Lithium Batteries • Interior space for customer electronics

• • Accommodates Trailers with 1 7/8” to 2 5/16” Ball Size
• • Both Locks Use Same Key for Convenience
• • Rugged and Weatherproof Security Locks
• • Tamper Resistant Lock Design for Increased Security

• • Battery Charger
• • 63V 600W Total Power
• • Many System Protections Available
• • Led Light Indicator
• • CE Certification

• • DC DIN Mount Circuit Breaker
• • Rated for up to 500VDC @ 100A
• • Mechanical life >10,000 Cycles

• • Input Voltage 10VDC to 60VDC
• • 8 wire (4 Pair) 56VDC 802.3bt PoE Output
• • High Power Output to 70W
• • Dual DC Inputs for Connecting 2 Power Sources
• • 5 Gigabit Data Throughput

• • Weatherproof Nema 4X / IP65, UV resistant, outdoor enclosure
• • Hinged Door with toggle clamp closures
• • Gasket Sealed and Lockable, Combo Lock Included
• • Universal perforated backplate for flexible interior mounting
• • Seven Weatherproof 20mm holes & weatherproof plugs

• • MPPT Temperature Compensated Charging
• • Fully Automatic Operation
• • LCD Displays: Battery Volts, Battery Temp, Battery Level, Load Current and Solar Current
• • Autoranging 12V or 24V Battery Arrays
• • Multimode Load Operation – 5 selectable modes

• • Weatherproof, UV resistant, outdoor enclosures
• • Powered over CAT5 cable using Passive POE and/or Solar
• • Generous interior space for customer electronics
• • Wall or Pole Mounting
• • Isolates Customer Equipment from Power Line Surges

• • Remotely Power Equipment thru CAT5 Cable up to 100m
• • Built in Ethernet and AC Surge Protection
• • Autoranging Switching Power Supply
• • Short Circuit, Over Current and Over Voltage Protection
• • Medium Power and High Power Models Available

• • High Power and rugged design
• • Short Circuit, Over-Voltage, Over-current Protection
• • 90-264VAC Auto Ranging Input
• • 47~56VDC Adjustable Output
• • -40C to +70C Operating Temperature

• • Dual Input – Charges 12V or 24V Batteries from Solar Panel and / or Passive PoE
• • Built in DC to DC converter with various Passive PoE output voltages available: 48V
• • Compact and high temperature operation
• • Low self consumption < 0.5W Applications
• • Remote Power Systems; Surveillance, Sensors

• • Input Voltage 48VDC
• • Passive PoE Output voltage 24VDC
• • High Power up to 35W
• • Integrated PoE Inserter
• • Low self consumption power

• • High Power Shielded Design (uses all 4 pairs)
• • 10/100/1000Mb Compatible
• • Removeable Wire Terminal Connector
• • 5VDC to 58VDC Power over Ethernet
• • Power On LED indicator

KEY FEATURES:

• 802.3af/at High Power
• 120V Power Supply
• (5) 10/100/1000Mb Ports
• Up to 35W per Port

• • Input Voltage 12VDC (Range 10-15VDC)
• • IEEE 802.3af/at Compliant Output 56VDC
• • Dual Inputs for Connecting 2 Power Sources
• • Integrated 10/100/1000MB PoE Inserter
• • High Power up to 35W

• • DC DIN Mount Circuit Breaker
• • Rated for up to 250VDC @ 100A
• • Mechanical life >10,000 Cycles

• • Steel
• • 35 x 7.5 x 525mm

• • Weatherproof, UV Resistant, Outdoor Enclosure
• • Double Keyed Locking System
• • Diamond Plated Aluminum
• • Rubber Gasket Nipple Hinged Top
• • Dual Screened Weatherproof Vents

• • Complete 2.2KW Remote Power Solutions for Off-Grid Operation.
• • Supports up to 360W continuous power with 6hrs peak sun.
• • Weatherproof Outdoor Enclosures with up to 1440Ah Battery
• • Expandable Ground Mounted Solar Mount
• • High Performance Sealed Lead Acid AGM Batteries

• • Outdoor Rated
• • 1.8m

• • 6.1m

• • 1.1m

• • Complete 170W Remote Power Solution for Off-Grid Operation
• • Weatherproof Outdoor Enclosures with up to 400Ah Battery
• • Enclosures can be Wall or Pole Mounted (pole not included)
• • High Performance Sealed Lead Acid AGM Batteries
• • MPPT and PWM Solar Charge Controllers, some with PoE output

• • 22-35VAC/VDC Input, 802.3bt 90W Output
• • Industrial Temperature Range: -40 to +70C
• • Up to 5Gigabit Data Passthru with Surge Protection
• • DIN Rail Mounting (Adapters Included)

• PoE Powered, No Other External Power Required
• Accepts 802.3af/at/bt Class 0 PoE or 24V Passive PoE
• Normally Open and Normally Closed 10A Relay Connections
• Gigabit Data Passthru with Surge Protection
• Wide Operating Voltage Range: -40C to +70C

• • IEEE 802.3at/af High Power Gigabit Midspan PoE Injectors
• • Up to 40W per Individual Port
• • 1U Standard Rack Mount (19”)
• • Configuration and status thru front panel RJ45 port or thru network
• • Supports non standard (Passive) devices

• • MPPT Temp Compensated Charging (99.5% Efficient)
• • Color LCD Displays: Battery/Load/Solar Volts/Amps/Watts, Battery Temp, and Battery Level
• • Fully Automatic Operation
• • Auto-ranging 12V or 24V Battery Arrays
• • Multimode Load Operation – 4 selectable modes

• • Provides Windows PC Connectivity for Tycon RS485 MPPT Solar Controllers
• • Compatible with the following models: TP-SC24-30N-MPPT TP-SC24-60N-MPPT TP-SC48-60P-MPPT
• • Works with MyGreen Solar Monitor PC Software
• • Powers from PC USB Port

• • Simple, Low Cost Design
• • Accommodates 10-14″ Wide Solar Panels
• • Flexible Side of Pole Mounting ( to 4.5” dia. Pole)
• • Heavy Duty Aluminum and Stainless Steel components for long life
• • Easy to Install – Reduced Installation Time

• • All components required to add an additional 4x 60-72 cell panels (nominally 230-360 watt) to the TPSM-350×2-TP 2 panel mount
• • Stainless Steel, Galvanized Steel, and Anodized Aluminum construction

• • Utilizes Components from TPSM-250X4-TP or TPSM350X2-TP to Create a Side of Pole Mount for two 250- 360W Solar Panels

• • Triple Power Inputs: 802.3bt PoE, Wire Terminal, 4 Pin DIN
• • Gigabit Compatible
• • Built-in Surge Protection
• • Automatic MDI/MDI-X Crossover
• • Automatic Speed and Duplex Sensing

• • Remote power or backup power for Ubiquiti airFiber antennas
• • Input Voltage +/- 36-72VDC; Output 56VDC Passive PoE
• • Isolated DC input
• • Integrated POE Inserter
• • High Power 70W

• • Input Voltage 9-36VDC; Output 48VDC (Passive)
• • Dual Inputs for connecting 2 power sources
• • Integrated 10/100MB POE Inserter
• • High Power up to 24W
• • Short Circuit, Over Current and Reverse/Over Voltage Protection